Suzhou Delfino Environmental Technology Co., Ltd.
Create value for customers!
Add to Cart
Online Conductivity Analyzer 2 SPST For Waste Water Treatment 100 * 100 * 120mm
Introduction
The online conductivity analyzer uses electrode measurement method to realize the continuously monitoring of the conductivity value in the solution. The AEC1-C2A conductivity controller can be connected with DRFN’s conductivity sensors with different cell constants to achieve different measurement ranges. This model has a conductivity measurement range of 0.00~10.00mS/cm.
Advantages Of The Online Conductivity Analyzer
2-electrode measurement method
IP66 protection grade
2 SPST multi-function relays
2 high-precision 0/4~20mA current output
A two-wire RS485 interface
128*64 large graphic dot matrix LCD screen
shortcut keys to carry out daily necessary maintenance
Applications Of The Online Conductivity Analyzer
● Power plant-water treatment;
● Water plants and sewage plants-wastewater treatment;
● Papermaking-production process/wastewater treatment;
● Chemical oil refining-production process/wastewater treatment;
● Metallurgy and mining-production process/wastewater treatment;
● Food and beverage-production process/wastewater treatment;
● Pharmaceutical industry-biological reaction and fermentation/wastewater treatment;
● Semiconductor-production process/waste water treatment/high-purity water production.
Technical Parameters
| Product Name | Conductivity analyzer |
| Product Model | AEC1-C2A |
| Software Version | DRFN conductivity Analysis software V1.0 |
| Conductivity Measuring Range | 0.00~10.00 mS/cm, full range automatic switching (The measurement range is related to the connected electrode constant) |
| Temperature Measuring Range | -10～150℃ /14~302℉ |
| Resistivity Display Range | 0.01Ω.cm~18MΩ.cm |
| TDS Display Range | 0.000mg/L~500g/L |
| Salinity Display Range | (0.00~10.0)% |
| Conductivity Resolution | 0.001μS/cm |
| Resistivity Resolution | 0.01Ω.cm |
| TDS Resolution | 0.001mg/L |
| Salinity Resolution | 0.01% |
| Temperature Resolution | 0.1℃/ 0.1℉ |
| Accuracy | 0.1% of measuring range |
| Stability | 0.05% of the measuring range every 24 hours, no accumulation |
| Repeatability | Better than 0.1% of the measuring range |
| Sensor Diagnosis | Screen image display |
| Relay Control | 2 settable SPST relays max. load 3A/250VAC |
| Analog Current Output | 2 settable 0/4~20mA active current loop output max. load 1000Ω |
| Communication Method | Two-wire RS485 interface, MODBUS RTU |
| Display Screen | 128*64 LCD, adjustable backlight mode |
| Configuration Information | Power failure protection, indefinite retention of parameters |
| Protection Level | IP66 |
| Operating Environment | 0～60℃, relative humidity less than 95% |
| Storage Environment | -20～70℃, relative humidity less than 55% |
| Shell Material | Enhanced ABS |
| Dimensions | 100*100*120mm (hole size 92*92 mm) |
| Mounting Method | panel mounting |
| Electrical Interface | Three M12*1.5 Gellen heads are reserved at the back of the instrument, with a wire diameter of 3~6.5mm. |
| Power Supply | 100~240V AC |
| Weight | 500g |
| Power Consumption | 3W |
Recommended Conductivity Sensors
| Model | Measuring Method | K-value | Measuring Range | Temperature Compensation |
| ASC100 | Graphite 2-pole electrode | 1 | 0~20000μS/cm | No |
| ASC200 | Graphite 2-pole electrode | 1 | 0~20000μS/cm | PT or NTC |
| ASC400 | Planar 4-pole electrode | 0.5 | 0~200000μS/cm | No |
| ASCK1 | 2-pole conductivity cell electrode | 1 | 1~2000μS/cm | PT or NTC |
| ASCK01 | 2-pole conductivity cell electrode | 0.1 | 0.1~200μS/cm | PT or NTC |
| ASCK001 | 2-pole conductivity cell electrode | 0.01 | 0.01~20μS/cm | PT or NTC |